Paint Booth Protective Film
A customer sent us a photo of their booth, which looked like one they ordered recently. The walls were a beautiful white and the filters had been recently changed. The floor in the booth was also a beautiful grey with little residue of paint or over-spray. I was shocked to hear that this booth was 10 years old, used every day….. and still looked this great!
I had to know what the booth owner was doing to keep his booth so nice. His answer was paint booth protective film, ordered from ToolsUSA.
When protective films are used on the walls, floors and lighting glass in your booth, they protect the surface, while being able to easily be replaced. You can easily get more out of your paint booth, while reducing the booth maintenance and improving the booth brightness.
ToolsUSA is an exclusive distributor of RBL Products, who manufacture protective film for the spray booth’s walls, floors and light boxes. It eliminates the time-consuming task of cleaning of your paint booth floors, walls and glass. Just use the film, and replace every 60-90 days to keep your paint booth looking brand new.
The floor film is a clear heavy-duty protective film to keep floors clean. It is easy to apply and comes on a reverse wound roll with the adhesive to the outside that enables easy layout of the film to the floor.
- Dry, non-skid surface
- Film resists temperatures up to 200⁰ F which is great for booths with an air make-up unit.
- Eliminates cleaning the floors with chemicals
- Resists tears, punctures and disintegration
- Replace every 60-90 days
The wall film comes in a clear, non-yellowing film and applies directly over booth walls and doors.
- Durable puncture resistant plastic film with UV inhibitor.
- Self-adhering film leaves no adhesive transfer.
- Easy to apply. Easy to cut film with SNIPPET KNIFE or razor blade.
- Remove when desired and apply new film.
- Film resists heat up to 200°F (93.3°C).
- Preserves booth lighting without distortion or deflection
The self-adhering light box glass film covers light box glass. The adhesive is designed for glass only, not recommended for booth walls.
- Eliminates the labored cleaning method of glass cleaner, razor blades and rags.
- Temperature resistance up to 200°F (93.3°C).
- Fast, accurate and economical!
- Preserves booth lighting without distortion or deflection
- At end point, tear at perforation or if between perforations, cut with razor blade or SNIPPET Knife
Whether you are awaiting your new paint booth to arrive, or have an older booth you want to protect, check out the adhesive films from ToolsUSA.
I would like to get prices on the booth protective films. We do not have a very large booth, it is a walk in approximately 5’X4’X7′